The most convenient and inexpensive solution for your, existing or new roof. With this motor you operate your Roll Off Roof very easily. For roofs under 600KG.
Note: Mains voltage: 220-240V – 50Hz
With 8 prongs
The Roll Off Roof drive set comes with a 0.5 m tine rod. There are attachment points on each tine bar with suitable slots and protruding lip to slide safely into the slot of the next part of the rack. The Roll off Roof drive is suitable for a roof length/width: up to 4 m. If the length of the roof exceeds 4m, you will need more gear sticks. The roof should not weigh more than 600Kg.
In the package:
1 x Roll Off Roof drive, 2 x infrared sensors, 2 x remote controls, 8 x rack rod (8 x 0.5 m), 1 x screw set, 1 x assembly instructions
- In the event of a power failure, you can also open or close the roof with the emergency release without any problems using the key provided.
Specifications:
Maximum Target Weight: 600 kg
Maximum length of roof: 3.50 m
Tooth rods: 0.5 m x 8 pieces
Maximum Opening Speed: 12 m per min.
Remote control distance: ≤ 30 m
Temperature range: -20 °C to +50 °C
Protection class: IP 54
Noise level: ≤ 56 dB
Limit switch: Magnetic limit switch
Traction force: 16 Nm
Work cycle: S2, 15 minutes
Overall dimensions of drive (l x w x h): approx. 24 x 22 x 26 cm
Rob T –
Goede motor en niet al te duur. Was makkelijk installeren met goede uitleg van de Eigenaar