The most convenient and affordable solution for your existing or new roof. This motor allows you to operate your roll-off roof with ease. For roofs under 600 kg.
Please note: Mains voltage: 220-240V – 50Hz
With 8 gear racks
The roll-off roof drive set comes with 0.5 m gear racks. Each gear rack features mounting points with suitable slots and a protruding lip to slide securely into the slot of the next section. The roll-off roof drive is suitable for a roof length/width of up to 4 m. If the roof length exceeds 4 m, additional gear racks are required. The roof must not weigh more than 600 kg.
In the box:
1 x roll-off roof drive, 2 x infrared sensors, 2 x remote controls, 8 x gear racks (8 x 0.5 m), 1 x screw set, 1 x assembly manual
- In the event of a power failure, you can also open or close the roof without any problems using the emergency release with the included key.
Specifications:
Maximum weight capacity: 600 kg
Maximum roof length: 3.50 m
Gear racks: 0.5 m x 8 pieces
Maximum opening speed: 12 m/min
Remote control range: ≤ 30 m
Temperature range: -20 °C to +50 °C
Protection class: IP 54
Noise level: ≤ 56 dB
Limit switch: Magnetic limit switch
Traction force: 16 Nm
Duty cycle: S2, 15 minutes
Total drive dimensions (L x W x H): approx. 24 x 22 x 26 cm
Rob T –
Goede motor en niet al te duur. Was makkelijk installeren met goede uitleg van de Eigenaar