Arduino Uno Rev.3 (original) is a microcontroller board based on the ATmega328. The board provides full microcontroller support and can be easily connected to a computer (usb) or power adapter, and you can get started right away.
The Uno is equipped with an ATmega16U2 (ATmega8U2 up to version R2) programmed as a USB/serial converter. An improvement over its predecessors equipped with FTDI’s USB/serial driver.
It is more commonly used to install a fully automated Roll Off Roof.
Characteristics:
Digital I/O pins: 14 (6 of which can be used as PWM output)
Analog inputs: 6
Contents: 16 MHz clock crystal, UBS connector, power connector, ICSP header and reset button
Power supply specifications:
- 6-20 V max (adapter not included)
- Microcontroller: ATmega328
- Digital I/O pins: 14 (6 of which can be used as PWM output)
- DC current per I/O pin: 40 mA
- DC current per 3.3 V pin: 50 mA
- Analog inputs: 6
- Flash memory: 32 KB (ATmega328) including 0.5 KB for the bootloader
- SRAM: 2 kB (ATmega328)
- EEPROM: 1 kB (ATmega328)
- Clock speed: 16 MHz
- Note: only install on Windows-based systems.
Reviews
There are no reviews yet.